from plotly.basedatatypes import BaseTraceHierarchyType as _BaseTraceHierarchyType import copy as _copy class Marker(_BaseTraceHierarchyType): # class properties # -------------------- _parent_path_str = "sunburst" _path_str = "sunburst.marker" _valid_props = { "autocolorscale", "cauto", "cmax", "cmid", "cmin", "coloraxis", "colorbar", "colors", "colorscale", "colorssrc", "line", "pattern", "reversescale", "showscale", } # autocolorscale # -------------- @property def autocolorscale(self): """ Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `marker.colorscale`. Has an effect only if colors is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed. The 'autocolorscale' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["autocolorscale"] @autocolorscale.setter def autocolorscale(self, val): self["autocolorscale"] = val # cauto # ----- @property def cauto(self): """ Determines whether or not the color domain is computed with respect to the input data (here colors) or the bounds set in `marker.cmin` and `marker.cmax` Has an effect only if colors is set to a numerical array. Defaults to `false` when `marker.cmin` and `marker.cmax` are set by the user. The 'cauto' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["cauto"] @cauto.setter def cauto(self, val): self["cauto"] = val # cmax # ---- @property def cmax(self): """ Sets the upper bound of the color domain. Has an effect only if colors is set to a numerical array. Value should have the same units as colors and if set, `marker.cmin` must be set as well. The 'cmax' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["cmax"] @cmax.setter def cmax(self, val): self["cmax"] = val # cmid # ---- @property def cmid(self): """ Sets the mid-point of the color domain by scaling `marker.cmin` and/or `marker.cmax` to be equidistant to this point. Has an effect only if colors is set to a numerical array. Value should have the same units as colors. Has no effect when `marker.cauto` is `false`. The 'cmid' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["cmid"] @cmid.setter def cmid(self, val): self["cmid"] = val # cmin # ---- @property def cmin(self): """ Sets the lower bound of the color domain. Has an effect only if colors is set to a numerical array. Value should have the same units as colors and if set, `marker.cmax` must be set as well. The 'cmin' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["cmin"] @cmin.setter def cmin(self, val): self["cmin"] = val # coloraxis # --------- @property def coloraxis(self): """ Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis. The 'coloraxis' property is an identifier of a particular subplot, of type 'coloraxis', that may be specified as the string 'coloraxis' optionally followed by an integer >= 1 (e.g. 'coloraxis', 'coloraxis1', 'coloraxis2', 'coloraxis3', etc.) Returns ------- str """ return self["coloraxis"] @coloraxis.setter def coloraxis(self, val): self["coloraxis"] = val # colorbar # -------- @property def colorbar(self): """ The 'colorbar' property is an instance of ColorBar that may be specified as: - An instance of :class:`plotly.graph_objs.sunburst.marker.ColorBar` - A dict of string/value properties that will be passed to the ColorBar constructor Supported dict properties: bgcolor Sets the color of padded area. bordercolor Sets the axis line color. borderwidth Sets the width (in px) or the border enclosing this color bar. dtick Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48" exponentformat Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B. labelalias Replacement text for specific tick or hover labels. For example using {US: 'USA', CA: 'Canada'} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax. len Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends. lenmode Determines whether this color bar's length (i.e. the measure in the color variation direction) is set in units of plot "fraction" or in *pixels. Use `len` to set the value. minexponent Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B". nticks Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto". orientation Sets the orientation of the colorbar. outlinecolor Sets the axis line color. outlinewidth Sets the width (in px) of the axis line. separatethousands If "true", even 4-digit integers are separated showexponent If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear. showticklabels Determines whether or not the tick labels are drawn. showtickprefix If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden. showticksuffix Same as `showtickprefix` but for tick suffixes. thickness Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels. thicknessmode Determines whether this color bar's thickness (i.e. the measure in the constant color direction) is set in units of plot "fraction" or in "pixels". Use `thickness` to set the value. tick0 Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`=*L* (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears. tickangle Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically. tickcolor Sets the tick color. tickfont Sets the color bar's tick label font tickformat Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: h ttps://github.com/d3/d3-format/tree/v1.4.5#d3- format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display "09~15~23.46" tickformatstops A tuple of :class:`plotly.graph_objects.sunburs t.marker.colorbar.Tickformatstop` instances or dicts with compatible properties tickformatstopdefaults When used in a template (as layout.template.dat a.sunburst.marker.colorbar.tickformatstopdefaul ts), sets the default property values to use for elements of sunburst.marker.colorbar.tickformatstops ticklabeloverflow Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is *hide past domain*. In other cases the default is *hide past div*. ticklabelposition Determines where tick labels are drawn relative to the ticks. Left and right options are used when `orientation` is "h", top and bottom when `orientation` is "v". ticklabelstep Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. `tick0` determines which labels are shown. Not implemented for axes with `type` "log" or "multicategory", or when `tickmode` is "array". ticklen Sets the tick length (in px). tickmode Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided). tickprefix Sets a tick label prefix. ticks Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines. ticksuffix Sets a tick label suffix. ticktext Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`. ticktextsrc Sets the source reference on Chart Studio Cloud for `ticktext`. tickvals Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`. tickvalssrc Sets the source reference on Chart Studio Cloud for `tickvals`. tickwidth Sets the tick width (in px). title :class:`plotly.graph_objects.sunburst.marker.co lorbar.Title` instance or dict with compatible properties titlefont Deprecated: Please use sunburst.marker.colorbar.title.font instead. Sets this color bar's title font. Note that the title's font used to be set by the now deprecated `titlefont` attribute. titleside Deprecated: Please use sunburst.marker.colorbar.title.side instead. Determines the location of color bar's title with respect to the color bar. Defaults to "top" when `orientation` if "v" and defaults to "right" when `orientation` if "h". Note that the title's location used to be set by the now deprecated `titleside` attribute. x Sets the x position with respect to `xref` of the color bar (in plot fraction). When `xref` is "paper", defaults to 1.02 when `orientation` is "v" and 0.5 when `orientation` is "h". When `xref` is "container", defaults to 1 when `orientation` is "v" and 0.5 when `orientation` is "h". Must be between 0 and 1 if `xref` is "container" and between "-2" and 3 if `xref` is "paper". xanchor Sets this color bar's horizontal position anchor. This anchor binds the `x` position to the "left", "center" or "right" of the color bar. Defaults to "left" when `orientation` is "v" and "center" when `orientation` is "h". xpad Sets the amount of padding (in px) along the x direction. xref Sets the container `x` refers to. "container" spans the entire `width` of the plot. "paper" refers to the width of the plotting area only. y Sets the y position with respect to `yref` of the color bar (in plot fraction). When `yref` is "paper", defaults to 0.5 when `orientation` is "v" and 1.02 when `orientation` is "h". When `yref` is "container", defaults to 0.5 when `orientation` is "v" and 1 when `orientation` is "h". Must be between 0 and 1 if `yref` is "container" and between "-2" and 3 if `yref` is "paper". yanchor Sets this color bar's vertical position anchor This anchor binds the `y` position to the "top", "middle" or "bottom" of the color bar. Defaults to "middle" when `orientation` is "v" and "bottom" when `orientation` is "h". ypad Sets the amount of padding (in px) along the y direction. yref Sets the container `y` refers to. "container" spans the entire `height` of the plot. "paper" refers to the height of the plotting area only. Returns ------- plotly.graph_objs.sunburst.marker.ColorBar """ return self["colorbar"] @colorbar.setter def colorbar(self, val): self["colorbar"] = val # colors # ------ @property def colors(self): """ Sets the color of each sector of this trace. If not specified, the default trace color set is used to pick the sector colors. The 'colors' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["colors"] @colors.setter def colors(self, val): self["colors"] = val # colorscale # ---------- @property def colorscale(self): """ Sets the colorscale. Has an effect only if colors is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Civi dis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow ,RdBu,Reds,Viridis,YlGnBu,YlOrRd. The 'colorscale' property is a colorscale and may be specified as: - A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package. - A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, 'green'], [0.5, 'red'], [1.0, 'rgb(0, 0, 255)']]) - One of the following named colorscales: ['aggrnyl', 'agsunset', 'algae', 'amp', 'armyrose', 'balance', 'blackbody', 'bluered', 'blues', 'blugrn', 'bluyl', 'brbg', 'brwnyl', 'bugn', 'bupu', 'burg', 'burgyl', 'cividis', 'curl', 'darkmint', 'deep', 'delta', 'dense', 'earth', 'edge', 'electric', 'emrld', 'fall', 'geyser', 'gnbu', 'gray', 'greens', 'greys', 'haline', 'hot', 'hsv', 'ice', 'icefire', 'inferno', 'jet', 'magenta', 'magma', 'matter', 'mint', 'mrybm', 'mygbm', 'oranges', 'orrd', 'oryel', 'oxy', 'peach', 'phase', 'picnic', 'pinkyl', 'piyg', 'plasma', 'plotly3', 'portland', 'prgn', 'pubu', 'pubugn', 'puor', 'purd', 'purp', 'purples', 'purpor', 'rainbow', 'rdbu', 'rdgy', 'rdpu', 'rdylbu', 'rdylgn', 'redor', 'reds', 'solar', 'spectral', 'speed', 'sunset', 'sunsetdark', 'teal', 'tealgrn', 'tealrose', 'tempo', 'temps', 'thermal', 'tropic', 'turbid', 'turbo', 'twilight', 'viridis', 'ylgn', 'ylgnbu', 'ylorbr', 'ylorrd']. Appending '_r' to a named colorscale reverses it. Returns ------- str """ return self["colorscale"] @colorscale.setter def colorscale(self, val): self["colorscale"] = val # colorssrc # --------- @property def colorssrc(self): """ Sets the source reference on Chart Studio Cloud for `colors`. The 'colorssrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["colorssrc"] @colorssrc.setter def colorssrc(self, val): self["colorssrc"] = val # line # ---- @property def line(self): """ The 'line' property is an instance of Line that may be specified as: - An instance of :class:`plotly.graph_objs.sunburst.marker.Line` - A dict of string/value properties that will be passed to the Line constructor Supported dict properties: color Sets the color of the line enclosing each sector. Defaults to the `paper_bgcolor` value. colorsrc Sets the source reference on Chart Studio Cloud for `color`. width Sets the width (in px) of the line enclosing each sector. widthsrc Sets the source reference on Chart Studio Cloud for `width`. Returns ------- plotly.graph_objs.sunburst.marker.Line """ return self["line"] @line.setter def line(self, val): self["line"] = val # pattern # ------- @property def pattern(self): """ Sets the pattern within the marker. The 'pattern' property is an instance of Pattern that may be specified as: - An instance of :class:`plotly.graph_objs.sunburst.marker.Pattern` - A dict of string/value properties that will be passed to the Pattern constructor Supported dict properties: bgcolor When there is no colorscale sets the color of background pattern fill. Defaults to a `marker.color` background when `fillmode` is "overlay". Otherwise, defaults to a transparent background. bgcolorsrc Sets the source reference on Chart Studio Cloud for `bgcolor`. fgcolor When there is no colorscale sets the color of foreground pattern fill. Defaults to a `marker.color` background when `fillmode` is "replace". Otherwise, defaults to dark grey or white to increase contrast with the `bgcolor`. fgcolorsrc Sets the source reference on Chart Studio Cloud for `fgcolor`. fgopacity Sets the opacity of the foreground pattern fill. Defaults to a 0.5 when `fillmode` is "overlay". Otherwise, defaults to 1. fillmode Determines whether `marker.color` should be used as a default to `bgcolor` or a `fgcolor`. shape Sets the shape of the pattern fill. By default, no pattern is used for filling the area. shapesrc Sets the source reference on Chart Studio Cloud for `shape`. size Sets the size of unit squares of the pattern fill in pixels, which corresponds to the interval of repetition of the pattern. sizesrc Sets the source reference on Chart Studio Cloud for `size`. solidity Sets the solidity of the pattern fill. Solidity is roughly the fraction of the area filled by the pattern. Solidity of 0 shows only the background color without pattern and solidty of 1 shows only the foreground color without pattern. soliditysrc Sets the source reference on Chart Studio Cloud for `solidity`. Returns ------- plotly.graph_objs.sunburst.marker.Pattern """ return self["pattern"] @pattern.setter def pattern(self, val): self["pattern"] = val # reversescale # ------------ @property def reversescale(self): """ Reverses the color mapping if true. Has an effect only if colors is set to a numerical array. If true, `marker.cmin` will correspond to the last color in the array and `marker.cmax` will correspond to the first color. The 'reversescale' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["reversescale"] @reversescale.setter def reversescale(self, val): self["reversescale"] = val # showscale # --------- @property def showscale(self): """ Determines whether or not a colorbar is displayed for this trace. Has an effect only if colors is set to a numerical array. The 'showscale' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["showscale"] @showscale.setter def showscale(self, val): self["showscale"] = val # Self properties description # --------------------------- @property def _prop_descriptions(self): return """\ autocolorscale Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `marker.colorscale`. Has an effect only if colors is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed. cauto Determines whether or not the color domain is computed with respect to the input data (here colors) or the bounds set in `marker.cmin` and `marker.cmax` Has an effect only if colors is set to a numerical array. Defaults to `false` when `marker.cmin` and `marker.cmax` are set by the user. cmax Sets the upper bound of the color domain. Has an effect only if colors is set to a numerical array. Value should have the same units as colors and if set, `marker.cmin` must be set as well. cmid Sets the mid-point of the color domain by scaling `marker.cmin` and/or `marker.cmax` to be equidistant to this point. Has an effect only if colors is set to a numerical array. Value should have the same units as colors. Has no effect when `marker.cauto` is `false`. cmin Sets the lower bound of the color domain. Has an effect only if colors is set to a numerical array. Value should have the same units as colors and if set, `marker.cmax` must be set as well. coloraxis Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis. colorbar :class:`plotly.graph_objects.sunburst.marker.ColorBar` instance or dict with compatible properties colors Sets the color of each sector of this trace. If not specified, the default trace color set is used to pick the sector colors. colorscale Sets the colorscale. Has an effect only if colors is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,E lectric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,Rd Bu,Reds,Viridis,YlGnBu,YlOrRd. colorssrc Sets the source reference on Chart Studio Cloud for `colors`. line :class:`plotly.graph_objects.sunburst.marker.Line` instance or dict with compatible properties pattern Sets the pattern within the marker. reversescale Reverses the color mapping if true. Has an effect only if colors is set to a numerical array. If true, `marker.cmin` will correspond to the last color in the array and `marker.cmax` will correspond to the first color. showscale Determines whether or not a colorbar is displayed for this trace. Has an effect only if colors is set to a numerical array. """ def __init__( self, arg=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, coloraxis=None, colorbar=None, colors=None, colorscale=None, colorssrc=None, line=None, pattern=None, reversescale=None, showscale=None, **kwargs, ): """ Construct a new Marker object Parameters ---------- arg dict of properties compatible with this constructor or an instance of :class:`plotly.graph_objs.sunburst.Marker` autocolorscale Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `marker.colorscale`. Has an effect only if colors is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed. cauto Determines whether or not the color domain is computed with respect to the input data (here colors) or the bounds set in `marker.cmin` and `marker.cmax` Has an effect only if colors is set to a numerical array. Defaults to `false` when `marker.cmin` and `marker.cmax` are set by the user. cmax Sets the upper bound of the color domain. Has an effect only if colors is set to a numerical array. Value should have the same units as colors and if set, `marker.cmin` must be set as well. cmid Sets the mid-point of the color domain by scaling `marker.cmin` and/or `marker.cmax` to be equidistant to this point. Has an effect only if colors is set to a numerical array. Value should have the same units as colors. Has no effect when `marker.cauto` is `false`. cmin Sets the lower bound of the color domain. Has an effect only if colors is set to a numerical array. Value should have the same units as colors and if set, `marker.cmax` must be set as well. coloraxis Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis. colorbar :class:`plotly.graph_objects.sunburst.marker.ColorBar` instance or dict with compatible properties colors Sets the color of each sector of this trace. If not specified, the default trace color set is used to pick the sector colors. colorscale Sets the colorscale. Has an effect only if colors is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,E lectric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,Rd Bu,Reds,Viridis,YlGnBu,YlOrRd. colorssrc Sets the source reference on Chart Studio Cloud for `colors`. line :class:`plotly.graph_objects.sunburst.marker.Line` instance or dict with compatible properties pattern Sets the pattern within the marker. reversescale Reverses the color mapping if true. Has an effect only if colors is set to a numerical array. If true, `marker.cmin` will correspond to the last color in the array and `marker.cmax` will correspond to the first color. showscale Determines whether or not a colorbar is displayed for this trace. Has an effect only if colors is set to a numerical array. Returns ------- Marker """ super(Marker, self).__init__("marker") if "_parent" in kwargs: self._parent = kwargs["_parent"] return # Validate arg # ------------ if arg is None: arg = {} elif isinstance(arg, self.__class__): arg = arg.to_plotly_json() elif isinstance(arg, dict): arg = _copy.copy(arg) else: raise ValueError( """\ The first argument to the plotly.graph_objs.sunburst.Marker constructor must be a dict or an instance of :class:`plotly.graph_objs.sunburst.Marker`""" ) # Handle skip_invalid # ------------------- self._skip_invalid = kwargs.pop("skip_invalid", False) self._validate = kwargs.pop("_validate", True) # Populate data dict with properties # ---------------------------------- _v = arg.pop("autocolorscale", None) _v = autocolorscale if autocolorscale is not None else _v if _v is not None: self["autocolorscale"] = _v _v = arg.pop("cauto", None) _v = cauto if cauto is not None else _v if _v is not None: self["cauto"] = _v _v = arg.pop("cmax", None) _v = cmax if cmax is not None else _v if _v is not None: self["cmax"] = _v _v = arg.pop("cmid", None) _v = cmid if cmid is not None else _v if _v is not None: self["cmid"] = _v _v = arg.pop("cmin", None) _v = cmin if cmin is not None else _v if _v is not None: self["cmin"] = _v _v = arg.pop("coloraxis", None) _v = coloraxis if coloraxis is not None else _v if _v is not None: self["coloraxis"] = _v _v = arg.pop("colorbar", None) _v = colorbar if colorbar is not None else _v if _v is not None: self["colorbar"] = _v _v = arg.pop("colors", None) _v = colors if colors is not None else _v if _v is not None: self["colors"] = _v _v = arg.pop("colorscale", None) _v = colorscale if colorscale is not None else _v if _v is not None: self["colorscale"] = _v _v = arg.pop("colorssrc", None) _v = colorssrc if colorssrc is not None else _v if _v is not None: self["colorssrc"] = _v _v = arg.pop("line", None) _v = line if line is not None else _v if _v is not None: self["line"] = _v _v = arg.pop("pattern", None) _v = pattern if pattern is not None else _v if _v is not None: self["pattern"] = _v _v = arg.pop("reversescale", None) _v = reversescale if reversescale is not None else _v if _v is not None: self["reversescale"] = _v _v = arg.pop("showscale", None) _v = showscale if showscale is not None else _v if _v is not None: self["showscale"] = _v # Process unknown kwargs # ---------------------- self._process_kwargs(**dict(arg, **kwargs)) # Reset skip_invalid # ------------------ self._skip_invalid = False